32
Spark plug
tightening torque
25–30 N–m
2.5–3.0 kg–m
18.5–21.5 lb–ft
AIR FILTER ELEMENT CLEANING AND
REPLACEMENT
Air filter element
1) Remove air cleaner cap.
2) Take cleaner element out of the air cleaner case.
3) Clean or replace with a new one. To clean element,
blow off dust with compressed air from inside of element.
4) Install cleaner element into air cleaner case.
NOTE:
After driving in a dusty area, check element for dust.
If found dusty, clean as outlined above.
FUEL TANK CAP, LINES AND CONNEC-
TIONS INSPECTION
1) Visually inspect fuel lines and connections for evi-
dence of fuel leakage, hose cracking and damage. Make
sure all clamps and hose connections are secure.
2) Repair leaky joints, imperfect hose connections and
clamps, if any.
3) Replace hoses that are suspected of being cracked.
4) Visually inspect fuel tank cap. If it’s damaged or deteri-
orated, replace it with a new one.
ELECTRICAL
WIRING HARNESS AND CONNECTIONS
1) Visually inspect all wires located in engine compart-
ment for evidence of breakage. Inspect the condition of
the insulation (cracks). All clips and clamps should have
solid connections to wires.
2) Replace any wires in deteriorated or otherwise defec-
tive condition.
To Next Page
Loading...
