5-8
FUEL
SYSTEM ANDTHROTTLE BODY
Connect a proper lead wire into the fuel pump lead wire cou-
pler (fuel pump side) and apply
12
volts to the fuel pump
(between
terminal
CA)
and terminal
(0))
for
10
seconds and
measure the amount of fuel discharged.
Battery
(?)
terminal -terminal
!A:)
(OIG
wire)
Battery
(-1
terminal
-
terminal
10)
(BN
wire)
If the pump does not discharge the amount specified, it means
that the fuel pump or fuel pressure regulator is defective or that
the fuel filter is clogged.
Fuel discharge amount:
Approx.
83
ml(2.812.9 USllmp oz) and morel10 sec.
NOTE:
The battery
must
be in
fully
charged condition.
FUEL PUMP RELAY INSPECTION
Fuel pump relay is located in back of the headlight assembly.
Remove the front fender.
(W7-6)
Remove the fuel pump relay
($1.
First, check the insulation between
(A)
and
@I
terminals with
.
I
.
.
.!.
pocket tester. Then apply
12
volts to
{Cl
and
ibl
terminals,
i+!
to
'
b,
+
(C,
and
-1
to
;DJ,
and check the continuity between and
i01.
/
'
,
If there is no continuity, replace it with a new one.
L
--
.h
a
J
-
To Next Page
Loading...
