BRAKE CALIPER REMOVAL AND
DISASSEMBLY
Loosen the lock-nut
Ti)
and remove the parking brake
adjuster
(2).
Remove the spring
13)
and disconnect the parking brake
cable
(4).
*
Remove the parking brake lever
:%.
Disconnect the brake hose by removing the brake hose union
bolt
(6)
and allow the brake fluid to drain into
a
suitable recep-
tacle.
Remove the parking brake housing
CT'
and gasket
(0).
Brake fluid, if it leaks. will interfere with safe runnlng
and discolor painted surfaces. Check the brake hose
and hose joints for cracks and fluid leakage.
Remove the brake caliper by removing the caliper mounting
bolts.
NOTE:
Before removing the caliper, sllghtly loosen the caliper holder
slide
pin
@)
to
facilitate later disassembly.
Remove the pads.
(W7-55)
Remove the pad spring
m.
Remove the callper holder sl~de pin
(m,
and then remove the
caliper holder
IT
and washer
fl51.
To Next Page
Loading...
