6-14
COOLING
AND
LUBRICATION
SYSTEM
WATER
PUMP
REMOVAL AND DISASSEMBLY
'7-
NOTE:
Before draining engine oil and engine coolant, inspect engine oil
and coolant leakage between the water pump and crankcase. If
engine oil is leaking, visually inspect the oil seal and O-ring.
If
u.
,~
engine coolant is leaking, visually inspect the mechanical seal
and seal washer.
p6-
16)
Drain engine coolant.
(-2-15)
Drain engine oil.
(C72-13)
D~sconnect the rad~ator hose
11
and breather hose
121.
Remove the rear brake switch and brake pedal
1%.
(-7-67)
.
_
.,
-
.A
Remove the right oil tank hose.
To Next Page
Loading...
