MASTER CYLINDER REMOVAL AND
DISASSEMBLY
Drain the brake fluid.
(W7-56)
Place a rag underneath the brake hose union bolt and reser-
voir tank hose connector on the master cylinder to catch any
split brake fluid. Remove the brake hose union bolt and
dis-
I
1
connect the brake hose and reservoir tank hose.
I
?
-4
i
,.
.
6.
,'
+
contacting any part
of
the vehicle. The brake fluld
reacts chemically with paint, plastics, rubber materi-
als, etc., and will damage them severely.
Remove the master cylinder rod pin.
(-7-67)
Remove the master cylinder mounting bolt.
Remove the master cylinder
(11.
Remove the connector
32)
and O-r~ng
151
by removtng the snap
ring
(4).
09900-061 08:
Snap ring pllers
Remove the dust boot
(5).
Remove the snap ring
(6'1.
09900-06108:
Snap ring pliers
r
T..
5.
p,
To Next Page
Loading...
