INSPECTION AND DISASSEMBLY
DUST
SEAL
I
Inspect the dust seal lips for wear or damage.
-,
If any defects are found, replace the dust seals with new ones.
m
A..
i
-.*.
".
h
Remove the dust seals with the special tool.
09913-501
21
:
Oil seal remover
1
The removed dust seals must be replaced with]
I
ones.
I
HUB BEARING
Inspect the inner race play of the hub bearing
by
hand while it
is
in the wheel hub.
Rotate the inner race by hand to inspect for abnormal noise and
smooth rotation.
If
there is anything unusual, replace the bearing
with a new one.
Remove the hub bearings with the special tool
09921-20240:
Bearlng remover
set
,
cnu-1
I
Do
not reuse the removed bearings.
I
Play
4-
Play
Remove the spacer
01.
To Next Page
Loading...
