E-16
COOLING
AND
LUBRICATION
SYSTEM
Remove the mechanical seal using the special tool.
09921-20240: Bearlng remover set
NOTE:
If there is no abnormal condition, the mechanical seal removal is
&
7
:spj
not necessay.
,'
,':,g!,
Place a rag over the water pump.
Remove the oil seal using a suitable bar
NOTE:
If there is no abnormal condition. the oil seal removal is not neo
essary.
Remove the mechanical seal ring
fib
and the rubber seal
dl!
from the impeller.
INSPECTION
MECHANICAL
SEAL
Visually inspect the mechanical seal for damage, with particu-
lar attention given to the sealing face.
Replace the mechanical seal that shows indications of leak-
age.
OIL SEAL
Visually inspect the oil seal for damage, with particular atten-
tion given to the lip.
Replace the oil seal that shows indications ol leakage.
..
To Next Page
Loading...
