Suzuki LT-R450K6 - Inspection and Disassembly

CHASSIS 7.47
INSPECTION AND DISASSEMBLY
STEERING SHAFT HOLDER BUSHING
lnspect the bushing for wear or damage. If any defects are
found, replace the bushing with a new one.
TIE ROD
lnspect the tie rod for distortion or damage.
If any defects are
found, replace the tie rod with a new one.
('71 Tie rod end
d) Lock-nut
(31 Lock-nut
(41 Tie rod
IU!TloNI
I The lock-nuts (2) have left-hand threads.
TIE
ROD END
lnspect the tie rod ends for smooth movement. If there are any
abnormalities, replace the tie rod ends with new ones.
lnspect the tie rod end boots for wear or damage.
If any defects are found, replace the tie rod ends with new ones.
STEERING SHAFT
lnspect the steering shaft for distortion or bend.
If any defects
are found, replace the steering shaft with a new one.