CHASSIS
7-45
REMOVAL
Remove the front wheel.
(-7-10)
Remove the side covers, fuel tank cover and front fender.
(-7-6)
Remove the handlebars.
(W7-41)
Remove the handlebar holder nuts, washers and handlebar
holder
(D.
.
Remove the tie rod end
(2)
with a commercially available ball
bearing joint remover
(3).
4
@
,
.
,
?(
b
.~
Loosen the steering arm plate bolt
ciil.
Remove the cotter pin and steering shaft nut
(9,
washer
el,
steering arm plate
c1
and dust seal
(8).
Remove the cotter pins, tie rod end nuts and spring washers.
To Next Page
Loading...
