7-86
CHASSIS
INSPECTION
AND DISASSEMBLY
Remove the following items from the swingarm:
Outer dust seals
!i)
Thrust washers
(21
Thrust bearings
t31
Outer spacers
;4':
Inner spacers
(3
SPACER
~7
$1
\.
lnspect the spacers for damage. If any defects are found.
-
replace the spacers with new ones.
-
DUST SEAL
lnspect the dust seal lips for wear or damage.
If
any defects are
ye,
found, replace them wtth new ones.
.'-
-
THRUST BEARING AND THRUST WASHER
v
Pr
lnspect the thrust washers
(1)
and thrust bear~ngs
(2)
for dam-
age.
If
any defects are found, replace them w~th new ones.
BEARING
Insert the inner spacers into bearings and check the play
when moving the inner spacers up and down.
If
excessive
fl
play is noted, replace the bearings with new ones.
lnspect the bearings for abnormal nolse and smooth move-
ment.
/
To Next Page
Loading...
