7.72
CHASSIS
REAR SHOCK ABSORBER DISPOSAL
The rear shock absorber unit contains high-pressure
nitrogen gas.
Mishandling can cause explosion.
'Keep away from fire and heat. High gas pressure
caused by heat can cause an explosion.
Release gas pressure before disposing.
GAS PRESSURE RELEASE
The rear cushion damper unit contains high-pressure nitrogen
gas. Make sure to observe the following precautions.
since it can explode or oil can splash hazardously.
When discarding the rear cushion unit, be sure to
release gas pressure from the unit following the pro-
cedures below.
Mark the drill center at the location
@
using a center punch.
Wrap the rear cushion unit with a vinyl bag and
fix
it on a vise as
shown.
Drill a
2
-
3
mrn
(0.08
-
0.1
2
in) hole at the marked drill center
using a
drilling machine and let out gas while taking care not to
get the
vinyl bag entangled with the drill bit.
Be sure to wear protective glasses since drilling
chips and
oll may fly off with blowing gas when the
drill bit has penetrated through the body.
'
Make sure to drill at the specified position. Other-
wise, pressurized oil may spout out forcefully.
I
I
To Next Page
Loading...
