Suzuki LT-R450K6 - Page 257

CHASSIS 7.21
Remove the spring 31
Remove the brake caliper holder 14).
Remove the rubber Darts.
Place a rag over the brake caliper piston to prevent the piston
-.
from popping out and then force out the piston using com-
l,e
pressed air.
Do not use
high pressure air to prevent brake callper
piston damage.
Remove the dust seals (9 and piston seals is':.
L-1
.m @-\
?J~ -b
4 '
Do not reuse the dust seals and piston seals to pre-
vent fluid leakage.
'6& s,
' e.