Inspect the dust seal lips and collars for wear or damage.
7,
If
any defects are found, replace the dust seals and collars w~th
t'
#
!
-.
new ones.
Y
Remove the dust seals.
The removed dust seals must be replaced with new
ones.
e,.,
'
-
--.
FRONT SHOCK ABSORBER BEARING
Inspect the bearings for abnormal noise and smooth movement.
Remove the needle roller bearings.
1qr-q-
.
Remove the bearing cages with the special tool.
a
09921-20240:
Bearing remover set
CA~]
;.-
1-
.
The removed bearing cages must be replaced with
new ones.
\
To Next Page
Loading...
