Tighten the wishbone arm pivot nuts to the specified torque.
Wishbone arm pivot nut: 65 N.m (6.5 kgf-m, 47.0
lb-ft)
Install the washer
ii).
Tighten the tie rod end nut
(2)
to the specified torque.
Tie rod end nut: 23
N.m
(2.3
kgf-m, 16.5 lb-R)
Install the cotter pin.
L~_AuT~
Replace the removed cotter pin with a new one.
Apply
THREAD
LOCK
SUPER
"1360"
to the disc cover
mounting bolts, and then tighten the bolts.
a99000-32130: THREAD
LOCK
SUPER "1360"
Install the brake caliper. (W7-24)
Install the front wheel hub and front wheel. (W7-13, 14)
To Next Page
Loading...
