REAR BRAKE DISC PLATE HOUSING AND SPROKET
FLANGE
Inspect the rear brake disc plate housing and sprocket flange for
f
-
f
'.fi
damage and wear of spline. If any defects are found, replace the
rear brake disc plate housing or sprocket flange with a new one.
.
REAR BRAKE CALIPER BRACKET
inspect the rear brake caliper bracket for
distortion
or damage.
If
any defects are found, replace the rear brake caliper bracket
with a new one.
DUST SEAL
Inspect the dust seal lips for wear or damage
If any defects are
found, replace the dust seals
wlth new ones.
/
/
.-
Remove the dust seals with the special tool.
09913-501 21:
011
seal remover
CAUTI~
1
-
The removed dust seals must
be
replaced with new
ones.
BEARING
inspect the play of the axle bearings by hand while they are in
the axle housing. Rotate the inner race by hand to inspect for
abnormal noise and smooth rotation.
If there is anything unusual, replace the bearings with new ones.
To Next Page
Loading...
