Suzuki LT-R450K6 - Page 333

CHASSIS 7-97
Install the bearings to the axle housing with the special tool.
09913-70210: Bearing installer set
09924-84510: Bearing installer set
09941-34513: Bearing installer set
[cnuTloNJ
First lnstall the right bearings iSi to the bottom, and
then install the spacer and left bearings
(2,.
'When installing the hub bearings to the axle hous-
ing, the sealed cover of inner bearing must face
inside, and the sealed cover of outer bearing must
face outside.
Q Right
I
-4-
Clearance
Install the dust seals with the special tool.
a 09913-70210: Bearing installer set
NOTE:
The stamped mark on the dust seals must face outside.