PERIODIC MAINTENANCE
2-29
REAR
AXLE NUT AND LOCK-NUT
Tighten initially at 1 month and every 3 months there-
after.
Loosen the axle lock-nut
(1)
and axle nut
r2)
with the special
tools.
09940-92460: Rear axle nut wrench set
Y
Apply THREAD LOCK "SUPER
1322"
to the thread portion of
the axle nut holder.
Tighten the axle nut
(2)
to the specified torque with the special
tool.
Rear axle nut: 240
Nm
(24.0 kgf-rn, 173.5 lb-ft)
-99000-32110: THREAD
LOCK
SUPER "1322"
(or equivalent thread lock)
a
09940-92460: Rear axle nut wrench set
NOTE:
When tightening the axle nut with the special tool, the reading
torque on the torque wrench is smaller than actual torque that is
applied to the axle nut. Therefore convert the tightening torque.
(V7-101)
~pply
THREAD
LOCK
SUPER
"1322~
to the thread portion of
%-
-
n
.(
w-.
a.
WV
the axle nut holder.
m99000-32110: THREAD
LOCK
SUPER "1322"
(or equivalent thread lock)
Tighten the axle lock-nut
(I!
to the specified torque with the
special tools.
Rear axle lock-nut: 240
N.m
(24.0 kgf-m, 173.5
lb-ft)
a
09940-92460: Rear axle nut wrench set
0
NOTE:
r"
When tightening the axle lock-nut with the special tool, the read-
ing torque on the torque wrench
Is smaller than actual torque
that is applied to the axle lock-nut. Therefore convert the
tighten-
ing torque.
(C3
7-
101)
To Next Page
Loading...
