*
Remove the starter motor lead wire
and wiring harness
03
from the clamp.
Disconnect the ground lead wire coupler
@I.
1L
-\-
Remove the parking brake cable
03'
from the bracket.
--
bd
Disconnect the generator startor coupler
ii4),
CKP
sensor
051
and gear position switch coupler
@?I.
Remove the generator lead wire and gear position switch lead
wire from the clamp.
r
Remove the rear brake switch
O
and brake pedal
(lW
(W7-67)
Remove the rear brake switch wire
OP
from the clamp
To Next Page
Loading...
