lnstall the engine sprocket with drive chain.
NOTE:
The letter
on the engine sprocket should face to the outside,
Apply THREAD
LOCK SUPER
"1303" to the sprocket bolts.
-99000-32030:
THREAD
LOCK
SUPER
"1303"
Tighten the engine sprocket bolts to the specified torque.
Engine sprocket bolt:
10
N.rn
(1.0
kgf-rn,
7.0
lb-ft)
Install the clutch release arm
11)
as shown in the illustration.
lnstall the gearshift lever
(2'1
in the correct position.
Gearshift lever height
!R:
5
-
10
mm
(0.2
-
0.4
in)
Gearshift lever bolt:
10
N.m
(1.0
kgf-m,
7.0
lb-ft)
Install the brake pedal and rear brake switch.
(W7-67)
Footresl
To Next Page
Loading...
