4-14 DRIVE TRAIN
BEVEL PINION GEAR SHAFT OIL SEAL
Install new stopper ring to pinion gear shaft securely.
Install new oil seal to the gear case with the special tool.
Apply SUZUKI SUPER GREASE to the new oil seal lip
groove.
" 09913-85210: Bearing/oil seal installer
$ 99000-25030: SUZUKI SUPER GREASE A ( USA)
99000-25010: SUZUKI SUPER GREASE A (Others)
NOTE:
After the backlash and tooth contact have been checked or
adjusted, install the oil seal.
Apply SUZUKI SUPER GREASE to the splines of the pinion
gear shaft and install the pinion gear shaft coupling joint by
tapping with a plastic mallet.
$ 99000-25030: SUZUKI SUPER GREASE A ( USA)
99000-25010: SUZUKI SUPER GREASE A (Others)
Apply 4 5 gram of WATER RESISTANCE GREASE to the
outside of seal lip groove.
& 99000-25160: WATER RESISTANCE GREASE
BEVEL RING GEAR/SHIM
Fit the removed shims
1 on both sides of the ring gear, then
install the ring gear
2.
PartShark.com
877-999-5686
To Next Page
Loading...
