ENGINE 3-31
• Install the bearing 3 with the special tool.
09913-70210: Bearing installer set
• Install the snap ring 4 securely.
• Install the oil seal 5 with the special tool.
09913-70210: Bearing installer set
• Apply SUZUKI SUPER GREASE “A” to the oil seal lip.
99000-25010: SUZUKI SUPER GREASE “A” or equivalent
BUSHING INSPECTION
Inspect the CVT case bushing for wear or damage.
If anything unusual is found, replace the bushing with a new
one.
REASSEMBLY
• Install the counter shaft 1 into the CVT case with a plastic
mallet.
PartShark.com
877-999-5686
To Next Page
Loading...
