Svantek SV 973 User Manual

SVAN 973 User Manual – Appendixes
119
1:n - logger with Lpeak values in profile n
2:n - logger with Lmax values in profile n
4:n - logger with Lmin values in profile n
8:n - logger with Leq values in profile n
16:n - logger with LAV values in profile n
32:n - logger with LR15 values in profile n
64:n - logger with LR60 values in profile n
Storing the results of 1/1 OCTAVE
analysis and 1/3 OCTAVE analysis in
logger’s file
b
bx - x - sum of the following flags
flags:
1 - logger with Lpeak values
8 - logger with Leq values
Logger step
d
dnns - nn number in seconds (1  60)
dnnm - nn number in minutes ( 1  60)
Integration period
D
D0 - infinity (measurement finished by
pressing the Stop or remotely - by sending
S0 control code)
Dnns - nn number in seconds
Dnnm - nn number in minutes
Dnnh - nn number in hours
Repetition of the measurement cycles
(RepCycle)
K
K0 - infinity (measurement finished by
pressing the Stop or remotely - by sending
S0 control code)
.....................
Knnnn - nnnn number of repetitions (1  1000)
Detector type in the LEQ function
L
L0 - LINEAR
L1 - EXPONENTIAL
Measure Triggering mode
(TriggerMode)
m
m0 - switched off (OFF)
m2 - SLOPE +
m3 - SLOPE –
m4 - LEVEL +
m5 - LEVEL –
m6 - GRAD+
Source of the measure triggering signal
for measurement functions: M1, M4,
M7
(TriggerSource)
s
s0 - LEQ result from the 1
st
profile
Source of the measure triggering signal
for measurement function M2
(TriggerOctSource)
o
o0 - LEQ result from the 1
st
profile
Source of the measure triggering signal
for measurement function M3
(TriggerTerSource)
t
t0 - LEQ result from the 1
st
profile
Measure Triggering level (TriggerLev)
l
Innn - nnn level in dB  (24  136)

Svantek SV 973 Specifications

General

Brand	Svantek
Model	SV 973
Category	Measuring Instruments
Language	English