Symmetricom TimeProvider 1000 User Manual

Chapter 6 Maintaining and Troubleshooting the TimeProvider
Troubleshooting the TimeProvider
158 TimeProvider User’s Guide 097-58001-02 Revision C – August 2005
INACTTIME The communication
inactivity timeout has
been set. If no activity
within the specified
time, the session
closes
EQPT 0 0 – Disable timeout
100 to 10000 seconds
INITLOG The event log has
been initialized
EQPT n/a n/a
IPADDR The IMC Ethernet
address has been
changed
EQPT 127.0.0.1 1.0.0.1 to 254.255.255.254
IPGATE The IMC Ethernet
gateway address has
been changed
EQPT 127.0.0.1 1.0.0.1 to 254.255.255.254
IPSUB The IMC Ethernet
subnet mask has
been changed
EQPT 255.255.255.0 n/a
ISDIFF Indicates that the
CRC of two Istate
images stored on
separate modules are
different
EQPT n/a n/a
ISEQ Indicates that the
CRC of two Istate
images stored on
separate modules are
equal
EQPT n/a n/a
LOGECHO The system echoes
the login or logout
events
EQPT ENABLE ENABLE – The login/logout
events are echoed
DISABLE – The
login/logout events are not
echoed
LOGIN A user has logged in
to the system
EQPT n/a n/a
LOGOUT A user has logged
out of the system
EQPT n/a n/a
PIDCHG A user’s password
has changed in the
database
EQPT pid User Password – up to 20
alphanumeric characters
Table 6-5. Event Codes (Continued)
Event ID
Keyword
Description
AID
TYPE
Default Value/
Keyword
Description of Values

Symmetricom TimeProvider 1000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 1000
Category	Clock
Language	English