Symmetricom TimeProvider 1000 User Manual

Chapter 6 Maintaining and Troubleshooting the TimeProvider
Troubleshooting the TimeProvider
168 TimeProvider User’s Guide 097-58001-02 Revision C – August 2005
OUTBEQPT Output module B was
physically inserted or
removed from the system
EQPTNSA IMMEDNO MJMJMJ
OUTCEQPT Output module C was
physically inserted or v
EQPTNSA IMMEDNO MJMJMJ
OUTDEQPT Output module D was
physically inserted or
removed from the system
EQPTNSA IMMEDNO MJMJMJ
RTMAEQPT Retimer module A was
physically inserted or
removed from the system
EQPTNSA IMMEDNO MJMJMJ
RTMBEQPT Retimer module B was
physically inserted or
removed from the system
EQPTNSA IMMEDNO MJMJMJ
RTMCEQPT Retimer module C was
physically inserted or
removed from the system
EQPTNSA IMMEDNO MJMJMJ
RTMDEQPT Retimer module D was
physically inserted or
removed from the system
EQPTNSA IMMEDNO MJMJMJ
<aid> = IMC
IOC1COMM A communication alarm
with either of the IOC1
modules.
EQPTNSA IMMEDNO MNMNMN
IOC2COMM A communication alarm
with either of the IOC2
modules.
EQPTNSA IMMEDNO MNMNMN
IMCFAIL A summary alarm of
IMC BIST faults
EQPT SA IMMED NO MJ MJ MJ
<aid> = IOC1
IMC1COMM A communication alarm
with the IMC module
and IOC1 module.
EQPTNSA IMMEDNO MNMNMN
IOC1TO2
COMM
A communication alarm
from IOC1 module to
IOC2 module.
EQPTNSA IMMEDNO MNMNMN
Table 6-7. Alarms (Continued)
Alarm ID
Or
CONDTYPE
Alarm Condition
Description
AID
TYPE
Service
Affecting
Error
Delay
Default
Error
Delay
Editable
Alarm Default
Level
SSU PRS SUB

Symmetricom TimeProvider 1000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 1000
Category	Clock
Language	English