Symmetricom TimeProvider 1000 User Manual

097-58001-02 Revision C – August 2005 TimeProvider User’s Guide 169
Chapter 6 Maintaining and Troubleshooting the TimeProvider
Troubleshooting the TimeProvider
IOCFAIL A summary alarm for
failures of the IOC
hardware that are not
specified in other alarms.
EQPT SA IMMED NO MJ MJ MJ
BTBCKUP All BesTime Backup
sources, inputs are
unusable to the
BesTime engine.
EQPT NSA IMMED NO __ NA __
CLKBRDG The local oscillator on
the specified IOC is in
Bridging Mode.
EQPT NSA IMMED NO – NA –
CLKHOLD The local oscillator on
the specified IOC is in
Holdover Mode.
EQPT SA IMMED NO MJ MJ MJ
CLKFREE The local oscillator on
the specified IOC is in
Free-run mode.
EQPT SA IMMED NO MJ MJ MJ
CLKWARM The local oscillator on
the specified IOC is in
Warm-up mode.
EQPT SA IMMED NO MN MN MN
SYNTHEOR The synthesizer
generating the modules
stable output frequency
has reached the defined
End-of-Range for the
type of oscillator used
on the IOC.
EQPT SA IMMED NO MJ MJ MJ
<aid> = IOC2
IMC2COMM A communication alarm
with the IMC module
and IOC2 module.
EQPT NSA IMMED NO MN MN
IOC2TO
1COMM
A communication alarm
from IOC2 to IOC1.
EQPTNSA IMMEDNO MNMNMN
IOCFAIL A summary alarm for
IOC BIST faults.
EQPT SA IMMED NO MJ MJ MJ
BTBCKUP All BesTime Backup
sources, inputs are
unusable to the
BesTime engine.
EQPT NSA IMMED NO – NA –
Table 6-7. Alarms (Continued)
Alarm ID
Or
CONDTYPE
Alarm Condition
Description
AID
TYPE
Service
Affecting
Error
Delay
Default
Error
Delay
Editable
Alarm Default
Level
SSU PRS SUB

Symmetricom TimeProvider 1000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 1000
Category	Clock
Language	English