Symmetricom TimeProvider 1000 User Manual

097-58001-02 Revision C – August 2005 TimeProvider User’s Guide 175
Chapter 6 Maintaining and Troubleshooting the TimeProvider
Troubleshooting the TimeProvider
INPLOS The specified input port
has Loss Of Signal.
When LOS is detected,
the input is removed
from the possible
reference list. The LOS
must be continuously
present for the Fault
Delay Time (FLTDELAY)
before disqualifying the
input as a possible
reference. After INPLOS
is set, the alarm clears
when the input signal is
LOS free for the Clear
Delay Time
(CLRDELAY).
T1 NSA IMMEDNO MNMNMN
INPOOF The specified input port
is receiving an Out Of
Frame signal. When
OOF is detected, the
input is removed from
the possible reference
list. The OOF must be
continuously present for
the Fault Delay Time
(FLTDELAY) before
disqualifying the input
as a possible reference.
After INPOOF is set, the
alarm clears when the
input signal is OOF free
for the Clear Delay Time
(CLRDELAY).
T1 NSA IMMEDNO MNMNMN
Table 6-7. Alarms (Continued)
Alarm ID
Or
CONDTYPE
Alarm Condition
Description
AID
TYPE
Service
Affecting
Error
Delay
Default
Error
Delay
Editable
Alarm Default
Level
SSU PRS SUB

Symmetricom TimeProvider 1000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 1000
Category	Clock
Language	English