Symmetricom TimeProvider 1000 User Manual

Chapter 6 Maintaining and Troubleshooting the TimeProvider
Troubleshooting the TimeProvider
178 TimeProvider User’s Guide 097-58001-02 Revision C – August 2005
IPGATE Gateway IP address has changed, <value>
IPHOST1 Host IP has changed, <value>
IPHOST2 Host IP has changed, <value>
IPHOST3 Host IP has changed, <value>
IPHOST4 Host IP has changed, <value>
IPSUB Subnet mask IP address has changed, <value>
ISDIFF Configuration images are different
ISEQ Configuration images are the same
LOGIN User logged in, <username>
LOGOUT User logged out, <username>
PIDCHG User password has changed
RESET Module has been reset
SIDCHG System Source ID has changed, <value>
USRADD User has been added
USRDEL No users defined
USRDEL User has been deleted
XFERFAIL Configuration transfer failed, <fromdev>,<todev>
XFEROK Configuration transfer successful, <fromdev>,<todev>
GPS Event Conditions
CKTIDCHG GPS Circuit ID has changed, <cktid>
ELEVMASK GPS elevation mask, <value>
MODE GPS antenna mode, <mode>
POS GPS antenna position, <pos>
IOC Event Conditions
CCALIGN Composite Clock alignment
CLKTYPE Clock type has changed, <state>
FWFAIL Firmware upgrade unsuccessful
FWOK Firmware upgrade successful
FWLOAD Beginning firmware upgrade
Table 6-8. Event Code Conditional Descriptions (Continued)
Event ID Event Conditional Description

Symmetricom TimeProvider 1000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 1000
Category	Clock
Language	English