Memory Card Slot
Your device includes a slot for a Micro Secure Digital (microSD
™
) flash
memory card. To insert or remove a memory card, you must first remove
the back cover as described in “Removable Battery” step 2, on page 17.
1 With the back cover removed and the camera at the top, you can see
the memory card slot on the upper left of the device.
2 To insert the memory card, hold the card with the gold contacts facing
down and the card notch facing to the right. Insert the card into the slot
and push to lock into place.
3 To remove the memory card, push the card in slightly and release; the
card should spring partly out of the slot. Pull the card free of the device.
!
Forcing the memory card out before pushing to release it may cause the
card or slot to break.
Device Basics 21
To Next Page
Loading...
