Indicators
Bluetooth On
Screen Title
Battery Level
Wireless
Signal Strength
Date and Time
Service Connectivity
New Message Notification (Email)
Sound Profile Setting
Wireless signal strength indicator – The number of signal bands
showing to the right of the radio tower icon represents the strength of the
signal at your current location.
If you see an X flashing over the radio tower icon, you’ve temporarily
lost your network connection and can make no calls.
Service connectivity indicators – One dot = device is connecting
to the GPRS/EDGE network; two dots = getting IP address; three dots =
connecting to the data service; = fully connected to the data service.
GSM (Phone) service only – A phone icon in the place of the means
you are using (or only have access to) GSM phone service. If you have a
call in progress you’ll also see a timer. If the phone icon is hollow, you can
only make emergency phone calls.
Bluetooth indicator – When you see this icon just to the left of the ,
Bluetooth features are available.
Battery level indicators – The number of bars showing in
the battery icon represents the charge remaining in the battery. While
charging, a lightning bolt appears, and when your battery is almost fully
discharged, a “!” appears.
Phone call indicators –
A timer appears when you have a call in progress; in the example,
call time elapsed is 3 mins, 40 secs. Note that the phone icon blinks. If you
have two calls active, the time displayed is for the foreground call.
Call forwarding is turned on. Your phone will not ring.
The Device Interface 33
To Next Page
Loading...
Need help?
General
