Options and accessories User Guide
Bidirectional parallel interface (CX-bid)
Select the CX-bid menu (3).
Setting options: On/Off
Default setting: On
CX-bid = ON sets the parallel interface of the printer to bidirectional mode (IEEE
1284, Nibble mode), e.g. for Windows Plug & Play.
CX-bid = OFF sets the interface to compatibility mode in order to ensure reliable
operation with special external boxes.
Confirm the setting by pressing the Set (1) key. Change to the next parameter
group with the Next key (4).
Line wrap (Wrap)
Select the Wrap menu (2).
Setting options: On/Off
Default setting: On
Wrap = On: If more characters than can be printed are transmitted per line, the
characters which cannot be printed on this line are printed at the beginning of
next line.
Wrap = Off: If more characters than can be printed are transmitted per line, the
characters which cannot be printed on this line are cut off.
Confirm the setting by pressing the Set (1) key.
102
To Next Page
Loading...
