Options and accessories User Guide
Installation
Unpacking the printer
Place your printer on a solid surface (see
Placing your printer).
Make sure that the “Up” symbols point in the
correct direction.
Open the packaging, take out the accessory
cassette and unpack it. Pull the printer out of
the cardboard box towards you and remove
the remaining packaging material.
Check the printer for any visible transport
damage and completeness. Apart from this
CD-ROM () the Quick start guide (), the
power cable () and the ribbon () must be
included.
If you find any transport damage or if any
accessories are missing, please contact your
dealer.
12
To Next Page
Loading...
