Tally Dascom 2820 - Page 148

User Guide Options and accessories
MTPL
IBM
XL24
IBM
AGM
Epson
LQ-2550
Epson
LQ-2170 Code Function
 
<ESC>Un Unidirectional print ON/OFF
   
<ESC>W<n> Continuous double width ON/OFF
 
<ESC>w<n> Double height print ON/OFF
 
<ESC>x<n> Set print quality (PQ)
 
<ESC>x<0> sets Draft or HS
 
<ESC>x<1> sets LQ or HQ

<ESC>X Font selection according to pitch and points
 
<ESC>X<n><m> Set left and right margin
   
<ESC>Y<n1> <n2> Set graphics print to 120 dpi
   
<ESC>Z<n1> <n2> Set graphics print to 240 dpi
    
<ESC>+F Assign character set Gü
    
<ESC>| Character generator LS3R
    
<ESC>} Character generator LS2R
    
<ESC>~ Character generator LS1R
    
<FF> Form feed
    
<HT> Horizontal tab jump

<HTS> Set tab stop at actual horizontal position

<IND> Line feed without CR
    
<LF> Line feed

<NEL> Line feed with CR

<PLD> Half step line feed

<PLU> Half step line feed back

<RI> Line feed without CR back
   
<SI> Condensed printing of 17.1 cpi ON

<SI> Switching the character generator (SS 3)
   
<SO> Double-wide printing ON

<SO> Switching the character generator (SS 2)
    
<VT> Vertical tab jump

<VTS> Set tab stop at current vertical position
Additional information is provided in the Programmer’s Application Manual
on this CD-ROM.
149