Tutorial
6.
Type your password, and press
(ENTER].
(To retain the secrecy
of your password, it will not appear on the screen when you type
it.)
7.
You are now logged on and can begin using the telecommunica-
tions service.
8.
Press
0
to close the
RAM
buffer, then press
(F71
to discon-
nect from the service. Later, after you have created an autolog
file, you will log on to your service again and use some of the
Terminal mode functions.
9.
Press
0
to return to the original Telecom screen.
10.
If
you have a printer, be sure that it is properly connected to
the computer and on-line. To Print the contents of the buffer,
press
0.
If you don’t have a printer, press
(F101
to Display the contents
of the buffer.
11.
Once you have displayed
or
printed the information, press
IF6)
to Clear the contents of the buffer.
Note:
The printout of the buffer contents includes most,
but not all, of the information that should be included
in an autolog file.
For
example, certain special char-
acters, such as
(ENTER)
and your password, are not
printed.
Creating
an
Autolog File
1.
Press
0
for Editlog to create a file for logging on automat-
ically to a host system.
88
Tandy
1000
To Next Page
Loading...
Need help?
General
