Tandy 1000 User Manual

Chapter 101 Telecom
The screen shows:
2.
3.
4.
5.
6.
7.
Enter Log filename:
You are asked to enter a name for the autolog file you are editing
(or creating for the first time). Type a filename and press
[ENTER).
Press 0 for Status; then press 0 to include the communica-
tions parameters you previously defined in the autolog file.
If you are using an auto dialing modem, press
iF2) for Call to
tell Telecom that this entry is a telephone number you want
it
to dial for you. Then type the service's telephone number. For
example type
5551211 (ENTER).
Press 0 for Pause, and type 2 (ENTER) to specify a 2 second
pause.
Press
0 for Send, then type "C (ENTER) to start the
communication process with the service. The
"C represents
(CTRLI a.
The logon sequence may require the User ID next. To tell the
modem to wait for the response from the Service, press
0 for
Receive. For example, type
User ID: for the prompt you receive
from the service.
Tandy 1000
89

Tandy 1000 Specifications

General

Processor	Intel 8088
Processor Speed	4.77 MHz
RAM	128 KB (expandable to 640 KB)
Operating System	MS-DOS 2.11
Manufacturer	Tandy Corporation
Release Year	1984
Storage	Single or double 5.25" floppy disk drive (360 KB), optional hard drive
Sound	Tandy 3-voice sound
Ports	Parallel, Serial
Graphics	CGA (Color Graphics Adapter)
Graphics Modes	320x200, 640x200