Tandy 1000 User Manual

Tutorial
8. Press (F41 to send your identification number to the service. For
example, type
73333,221"M (ENTER). The "M represents a car-
riage return
(CEC 0).
9. Next, suppose the service prompts you to enter your password.
Press
0 to specify that the text entered next will be received
from the service, then type
Password:.
10. The next item of the autolog file is your response to the previous
request for your password. Press
0 to transmit your
password, then type your password, and press
(ENTER). For
example, type
SECRETAM (ENTER).
If you are using an auto dialing modem, your screen should show:
STATUS: 30,8,N,1 ,Y ,N,N,N,3
CALL: 5551212
PAUSE: 2
SEND: "C
RECV:
User ID:
SEND: 73333,22IAM
RECV: Password:
SEND: SECRETAM
(If you are using a non-dialing modem, your screen should be the
same, except that the phone number is not included.)
11. To save the autolog file and return to the original Telecom
screen, press
0 (ENTER).
90
Tandy 1000

Tandy 1000 Specifications

General

Processor	Intel 8088
Processor Speed	4.77 MHz
RAM	128 KB (expandable to 640 KB)
Operating System	MS-DOS 2.11
Manufacturer	Tandy Corporation
Release Year	1984
Storage	Single or double 5.25" floppy disk drive (360 KB), optional hard drive
Sound	Tandy 3-voice sound
Ports	Parallel, Serial
Graphics	CGA (Color Graphics Adapter)
Graphics Modes	320x200, 640x200