Reference
To Copy the contents of the copy buffer to or from a diskette file,
press
0
again. (When copying from
a
diskette file, do not select
text before you use Copy.) The following prompt appears:
From:
To:
Enter the name of the diskette file from which you wish to Copy
text into this document. The file is loaded into the copy buffer. If
there is not enough room in the copy buffer for the entire document
file, the
F
r
o
m
:
message is cancelled, and the screen shows:
Not
enough
memory
To copy the text currently in the copy buffer, press
(ENTER)
to move
to the
To
:
prompt. Enter the name of the diskette file to which
you wish to copy the text. The text is appended to that file.
Delete
Press
0
or
(DELETE)
to Delete all selected text. The text is
immediately deleted. If no text is selected, the character under the
marker is deleted.
Insert
Press
0
or
(INSERT)
to Insert the contents of the copy buffer
at the current marker position.
Print
Press
(PRINT1
to Print the entire document. Make sure that you
have checked the printer settings in the Printer subfunction
(subfunction
GCEl
0)
and that your printer is ready to print.
Note:
To print part of a document, you can use the print
command
(SHIFT)
(PRINT)
and print everything
currently on the screen. Use the Find function or the
arrow keys to display the text you want to print.
32
Tandy
1000