Chapter
41
Text
Save
Press
0
to Save a copy of this document to a diskette file. The
following prompt appears:
Enter
save
filename:
Enter the name of the file to which you wish to Save this document,
and press
(ENTER).
If
you do not enter a filename, the document
name
is
used, and the file is saved onto the diskette in Drive
A
or
the Drive you specified in the Main Menu Swap function.
Select
Use Select to define a word or block of text in order to perform some
other operation on it. Position the marker on the first character you
want to select, and press
0.
Then, use the arrow keys to place
the marker over the last character in the block. All highlighted text
between the first and current marker positions is selected.
After you select your text, Copy or Delete it, as appropriate. Press
0
if you decide not to use the text you have selected.
If
you use
any other Text operation except Find or exit the Text function before
you Copy or Delete, the text
is
unselected.
You can use the Find function to display text for selecting. Use Find
to
search for the first character, word, or string you want to include
in your text block. Then select the block as usual.
COPY
Press
0
to
place all selected text in the copy buffer. Copy does
not delete the text but merely makes a duplicate of it. You can Insert
this duplicate somewhere else in your document or Copy it to a
diskette file. Copy can also save all or part of a document file to
diskette or duplicate a diskette file and copy
it
to this document.
To Insert duplicated text at another location, move the marker to
the appropriate position, and press
0.
The text is inserted at that
position.
Tandy
1000
31
To Next Page
Loading...
