CROSS PERSONAL: Service & maintenance manual - rev. 1.1
Page 6.38
(3) Check if the receiver has been correctly mounted on the machine.
(4) To check for electromagnetic noise near the machine, use Test Box Excite as detailed here
below. You can use one of the following cables ELT-16 (0WC00518AB), CBQ-28
(0WC00390AC) or TRM-28 (0WC00336AC) as connection cable.
The circuit lights the LED for each heart beat and/or disturbance received: in this way it is
possible to determine whether there is any interference, and identify its sources.
To Next Page
Loading...
