Technogym SYNCHRO EXCITE 2009 - Front Guards

SYNCHRO EXCITE 2009: Service & maintenance manual - rev. 5.2
Pagina 7.22
7.7.3. FRONT GUARDS
Figure 7.7-6
Carry out the operations described in
paragraph: 7.7.2. “Brake box cover guard”.
1. Remove the guard (a) unhook the tabs in the
direction indicated by the arrows.
2. Pull it out from the top.
Figure 7.7-7
3. Back off the screws (b), on either side of the
machine using a 4mm hexagonal wrench
Figure 7.7-8
4. Back off the 4 screws (c)
using a 4mm
hexagonal wrench m.
5. Remove the two lateral guards.
To reassemble the guards, carry out the above
steps in reverse order.