SYNCHRO EXCITE 2009: Service & maintenance manual - rev. 5.2
Pagina 12.2
12.2. REQUIRED TOOLS
The following tools are required for carrying out the various disassembly, adjustment and
maintenance action on the machine:
• Small Phillips screwdriver;
• Medium Phillips screwdriver;
• Big Phillips screwdriver;
• 17mm wrench;
• 3mm hexagonal wrench;
• 4mm hexagonal wrench;
• 5mm hexagonal wrench;
• 6mm hexagonal wrench;
• 8mm hexagonal wrench;
• 10mm hexagonal wrench;
• 25mm Racket wrench;
• 27mm Racket wrench;
• 10mm socket wrench;
• Snap ring pliers;
• Bicycle pedal extractor.
You can order a complete set of hexagonal wrenches consisting of 7 pieces: 2, 2.5, 3, 4, 5, 6 and
8 mm. The code to be used is R0003677AA.
• PC equipped with Service Excite Loader
• Serial communication cables for Excite Loader (cod.R0002534AB);
• Excite Test box (cod.H0003180AA-UK).
• Clean Well bottle (cod.0V000356AA).
To Next Page