SYNCHRO EXCITE 2009: Service & maintenance manual - rev. 5.2
Page 7.3
7.1.3. 700WTV VERSION (WELLNESS TV)
Figure 7.1-7
1.
Turn off the machine and unplug the mains
lead from the wall outlet
2. Back off the 4 screws (a)
Phillips screwdriver.
Figure 7.1-8
3.
Unplug the connectors as indicated in the
figure at left [CN30-CN26-CN27-CN19-
CN21- CN22-CN25].
4. Remove the display.
Figure 7.1-9
5. Back off the 2 screws (b), using an 8mm Hex
wrench, to remove the rear display support.
To reassemble the display, carry out the above
steps in reverse order.