SYNCHRO EXCITE 2009: Service & maintenance manual - rev. 5.2
Page 6.33
6.13. THE MACHINE DOES NOT READ THE TGS
The machine displays this error if the TGS reader is not working properly, or if it is not supplied by
the display board.
THE MACHINE DOES
NOT READ THE TGS
Is the v oltage at the input to the
TGS reader correct?
Is the v oltage at the output to
the Display board correct?
Replace cable CBQ-32
1
2
YES
NO
YES
Replace the display board
NO
A
Is the serial communication link
between the display board and
the TGS reader OK?
Replace the TGS reader. Is the
communication link between the
display board and the TGS
reader OK?
TGS reader def ectiv e
3
3
YES
NO
YES
Replace the display board
NO
A
Replace the TGS reader