SYNCHRO EXCITE 2009: Service & maintenance manual - rev. 5.2
Page 9.23
9.4.1.3. Default Setting
To load the default parameter values, scroll using the +/- effort level keys until the display shows:
DEFAULT SETTING ?
press ENTER to write the default values to the low kit, and return to the upper menu level by
pressing CLEAR for a few seconds.
To write these parameters to the low kit, use the “Write to low kit” function.
9.4.1.4. Table of configuration parameters
Speed ratio (integer part)
Minimum braking current (standby pos.) [mA]
Maximum continuous power [W]
Machine torque correction coefficient (constant torque)
User friction torque
Maximum coil temperature [°C]
Minimum revolutions [RPM]
Speed ratio (decimal part)
User friction torque delta
To Next Page
Loading...
