SYNCHRO EXCITE 2009: Service & maintenance manual - rev. 5.2
Page 6.21
6.7. THE RADIO DOES NOT PLAY
With the ANALOGIC signal, the radio signal can only be acquired from an aerial antenna
signal. If the machine is connected to a digital source (or to a satellite antenna) it will be
impossible to use the radio function.
If ACTIVE Wellness TV interface is installed, check that the parameter: 9.3.17. “Radio” is
correctly set.
It is now possibile only the tuning of the digital band and not more the analogue one.
1
Is the TV channel sound OK?
Replace the CPU board.
Does it work correctly ?
Perf orm the "Audio does
not work" procedure
Def ectiv e CPU board
NO
YES
THE RADIO DOES NOT
PLAY
YES
Check if the antenna
signal is good
NO
Is the tuner connected to a
terrestrial antenna cable
without any type of interruption
(multiplexer, TV distribution
module)?
Connect a signal that
meets these
requirements
NO
YES