SYNCHRO EXCITE 2009: Service & maintenance manual - rev. 5.2
Pagina 6.22
Follow the procedure step by step to correctly diagnose the problem. Take particular care with the
checks highlighted by circled numbers, which are described in detail below:
(1) Chech that the antenna signal matches with the minimal requested specifications detailed at
paragraph: 5.2. āInstallation requirements and specifications for Wellness TV machinesā.
If you replace Display board/Brake board, check that its SW version is updated, otherwise
install the last version.
The TV and RADIO channels is located in the Digital TV in the CPU Board and must
necessarily be present. This means that when even one of the two boards will be replaced,
should be re-stored channels through search or transferring from another machine via TGS
key or cable transfer.
To Next Page
Loading...
