SYNCHRO EXCITE 2009: Service & maintenance manual - rev. 5.2
Pagina 9.46
9.8.2. CONNECTING TWO MACHINES USING A CSAFE CONNECTION (METHOD
RECOMMENDED)
Disable the TGS reader (if present on the machine) through the
proper function in the User Menu: 9.3.4. “Enable TGS” before to
carry out the following procedure.
1. Connect the two machines together using the proper cable described at
paragraph 4.3. “Cable for exchanging TV channel tuning data between
two machines”.
2. On both machines, enter the configuration menu of the channels that
need to be tuned.
3. Press the “READ FROM TGS” on the machine to be tuned the
channels, appears on the machine the written “WAITING”, move on
the machine from which you want to transfer channels and press the
“SAVE IN TGS” button on the already tuned machine.
4.
Store the data transferred on the machine being tuned by pressing
“SAVE IN EEPROM”.
5. Exit the menu on both machines by pressing “HOME”.
To Next Page
Loading...
