SYNCHRO EXCITE 2009: Service & maintenance manual - rev. 5.2
Pagina 9.44
To tune and memorise radio channels, proceed as follow:
It is now possible only the tuning of the digital band and not more the analogue one.
1. Press AUTOMATIC SEARCH. In this phase, a temporary list of
TV channels found, will be stored and visualized in column 1. In
column 2 there are the number of the channels.
2.
Wait the search stops or stop it by pressing STOP SEARCH key.
The channels found in the meantime can be memorised.
3. Use the keys under the list of channels in column 1, to
scroll through the pages with the channels found during the
search, while use the keys under the list of numbers in
column 2
, to scroll through the pages with the numbers and
names associated to the channels.
4. Once you have found a channel to memorise, select it in column
1, then press the number that you want
column 2.
If a channel has already been memorised under that number,
the old channel will be overwritten with the new one.
5.
Repeat the procedure above for each channel you want to
memorise.
6. In this way the channels will remain i
equipment is switched off (RAM memory
memorise the changes (in EPROM) press SAVE IN EPROM key.
7.