Figure 5-10
5.3.5.1 Advanced Setup
is shown as in Figure 5-11. Please draw a circle to enable
Advanced setup interface
corresponding function and then double click current item to go to setup interface.
Figure 5-11
5.3.5.2 IP Filter
is shown as in Figure 5-12. You can add IP in the following list.
on, only the IP listed below can access
his function, all IP addresses can access current DVR.
IP filter interface
The list supports max 64 IP addresses.
Please note after you enabled this functi
current DVR.
If you disable t
64
To Next Page
Loading...