4200A-SCS Parameter Analyzer User's Manual Section 8: Use the 4200A-CVIV Multi-Switch
4200A-900-01 Rev. D/April 2020 8-5
Create and rename a project for I-V and C-V measurements with
compensation
To create and rename a project for I-V and C-V measurements with compensation:
1. Choose Select.
Figure 105: Select highlighted
2. In the Library, select Projects.
3. Select New Project.
4. Select Create.
Figure 106: Select a New Project from the Project Library
5. Select Yes when prompted to replace the existing project.
6. Select Rename above the project tree. Enter a project name into the text box, then select Enter.
CVIV_COMPENSATION is the test name for this example.
Figure 107: Rename function located above the project tree
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
