4200A-SCS Parameter Analyzer User's Manual Section 8: Use the 4200A-CVIV Multi-Switch
4200A-900-01 Rev. D/April 2020 8-13
2. Select Actions.
3. To find the action, type cviv into the search bar, then select Search.
4. Select the cviv-configure action, then select Add to copy it to the project tree.
Configure the action
To configure the action:
1. Select Configure.
Figure 118: Configure highlighted
2. In the project tree, select the cviv-configure action.
Figure 119: Populated cviv-configure action
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
